22
Opening and Closing the Charging Case
The AMS device comes in a plastic charging case that is used for storing it when not in use and for charging the
rechargeable battery in the AMS (see
Using the Rechargeable Battery
on page
). The AMS device should be
stored in the sealed charging case when not in use.
The charging case is air-tight. After air transport it may be necessary to relieve the pressure differential in order to
open the case. To do so, loosen the pressure relief vent screen until air enters the case. Then re-tighten the screw.
Opening the Charging Case
To open the charging case:
1)
Loosen the captive screws on the top of the case.
2)
Lift the lid of the charging case using the captive screws.
Closing the Charging Case
To close the charging case:
1)
Lower the lid.
2)
Tighten the captive screws until the top of the case is secured.
Loosen the captive screws
