4
B. Electronic Magnetic Compatibility
Guidance and manufacturer’s declaration – electromagnetic emissions
The iOne-MP176 is intended for use in the electromagnetic environment specified
below. The user should assure the products are used in such an environment.
Emissions test
Compliance
Electromagnetic environment
–
guidance
RF emissions
CISPR 11
The iOne-MP176 uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
The iOne-MP176 is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Recommended separation distances between
portable and mobile RF communications equipment and the iOne-MP176
The iOne-MP176 is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The user of the iOne-MP176 can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the
iOne-MP176 as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of
transmitter
m
150 kHz to
80 MHz
d =
1,2
80 MHz to
800 MHz
d =
1,2
800 MHz to 2,5 GHz
d =
2,3
0,01
0,12
0,12
0,23
0,1
0,38
0,38
0,73