CyberMed N19 User Guide
Page 9
System Assembly
This section provides system assembly information and procedures. While performing
any installation, use a grounded wrist strap before handling computer components and
carefully follow all installation procedures. Static electricity may damage the
components. This section includes instructions for how to install the following:
•
Memory modules
•
Hard disk drive
•
Mini-PCIe cards
Necessary Tools
A Phillips screwdriver can be used to do most of the installation. One with
a magnetic head is recommended. Applied maximum torque is 5kg.
Pliers can be used as an auxiliary tool to connect some connectors or
cables.
Forceps/tweezers can be used to pick up tiny screws or set up the
jumpers.
Rubber gloves can prevent injury from static charge.
An electric screwdriver can be used to secure all screws more quickly.
