![Cybermind Visette45 Operation Manual Download Page 33](http://html.mh-extra.com/html/cybermind/visette45/visette45_operation-manual_2701997033.webp)
TECHNICAL DATA
OPERATION MANUAL
9.1 USE
Operate the product only with the supplied AC Power adaptor. If you use a different
power adaptor it may cause a malfunction and invalidate your warranty. Should any
liquid or solid object fall into the cabinet, unplug the product and have it checked by
qualified personnel before attempting to operate it further.
Always turn the product off when you do not use it, Unplug the product from the
mains if you are not going to use it for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.
Do not overload mains, extension cords, or convenience receptacles beyond their
capacity, since this can result in fire or electric shock.
Do not use attachments not recommended by the manufacturer, as they may cause
hazards.
Avoid using earphones at high volume. Hearing experts advise against continuous,
loud, and extended play. If you experience a ringing in your ears, reduce volume or
discontinue use.
Do not touch the AC power adapter or power supply with wet hands. If you fail to
observe this, it may cause electric shock. Do not drop or give a mechanical shock
to the product.
9.2 Installation
To prevent internal heat build-up, do not block the ventilation openings. Avoid
operating the product at temperatures below 41F (5C)
Do not subject the product to high temperature or direct sunlight. If you do not
observe the above instructions, the product may become deformed and the
screens may become impossible to align. Follow the instructions in checking the
screen position in the manual, to be sure the screens are aligned. If you find the
screens misaligned, have the product repaired at your local service centre.
Do not place the product in locations where it is wet, humid, dusty, smoky, or
steamy.
Do not use this product near or around water. It may cause fire or electric shock.
Especially, do not use this product in the bathroom. If the product is transported
directly from a cold room to a warm location, or if the room temperature has
changed suddenly, the picture may be blurred or show poor colour. This is because
moisture has condensed on the mirror or lenses inside. If this happens, let the
moisture evaporate before using the product
Do not place the product on an unstable cart, stand, table or shelf. The product
may fall causing serious injury to a child or an adult, and serious damage to the
product. Do not allow anything to rest on or roll over the main lead, and do not
place the product where the main lead is subject to wear or abuse.
9.3 Others
Unplug the product from the mains and refer servicing to qualified service
personnel under the following conditions:
1) When the main lead or plug is damaged or frayed
2) If liquid has been spilled into the product
3) If the product has been exposed to rain or water
4)
If the product has been subjected to excessive shock by being
dropped, or the cabinet has been damaged.
If the product does not operate normally when following the operating instructions.
Adjust only those controls that are specified in the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation. When the
product exhibits a distinct change in performance - this indicates a need for a
service
32