The IP Endpoint Company
Peavey MMA 8150T Amplifier to Singlewire Paging Adapter Connections
Peavey MMA 8150T Amplifier
Singlewire Paging Adapter Connections
+ -
+
-
Notes
This page shows possible connections to a TPM-S2 module
Connect the SIP Paging Adapter's Page Port output terminal pins to the INPUT
on the TPM-S2 module.
2 conductor, shielded speaker wire is recommended.
s
Page Port Connections
Pin
Description
1
Fault Sense Input (Common).
2
Fault Sense Input (Sense).
3
Positive 600-Ohm Audio Output
a
a.The 600-Ohm audio output of the page port is
also suited for interfaces with lower input
impedances.
4
Negative 600-Ohm Audio Output
a
5
Audio Ground Reference.
6
Relay Contact - Common
b
b.1 Amp at 30 VDC for continuous loads.
7
Relay Contact - Normally Open
b
PGM IN
930887A
Keep as short as possible
Shield/
Drain Wire
Shield/
Drain Wire
Hi
Lo
Hi
Lo
Balanced
