CyberData Singlewire InformaCast Series, Operation Manual, Page: 58 / 91

Installing the Singlewire InformaCast® RGB (Multi-Color) Strobe
Singlewire InformaCast® RGB (Multi-Color) Strobe Setup
Operations Guide 931633A CyberData Corporation
50
2.3.11 Configure the Audio Configuration Parameters
The Audiofiles page is used to add custom audio to the board. User uploaded audio will take
precedence over the audio files shipped with the Intercom.
1. Click on the Audiofiles menu button to open the Audiofiles page ( Figure 2-25 ).
Figure 2-25. Audiofiles Configuration Page
2. On the Audiofiles page, enter values for the parameters indicated in Table 2-15 .
Note The question mark icon ( ) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Web Page Item Description
Available Space Shows the space available for the user to save custom audio files if they want to change the
message when the door or sensor is triggered.
Intrusion Sensor Triggered Corresponds to the message “Intrusion Sensor Triggered” (24 character limit).
Door Ajar Corresponds to the message “Door Ajar” (24 character limit).
Click on the Browse button to navigate to and select an audio file.
The Delete button will delete any user uploaded audio and restore the stock audio file.
The Save button will download a new user audio file to the board once you've selected the
file by using the Browse button. The Save button will delete any pre-existing user-uploaded
audio files.
Singlewire Multicolor Strobe
Table 2-15. Audiofiles Configuration Parameters