Installing the VoIP V2 Paging Amplifier
Paging Amplifier Setup
Operations Guide
930324M
CyberData Corporation
13
2.2.4 VoIP V2 Paging Amplifier System Installation and Connection Options
The following figures show the connection options for the VoIP V2 Paging Amplifier.
Figure 2-8. Paging Amplifier Connections
Figure 2-9. Sensor Connection
Figure 2-10. Relay or Strobe Alert Connection
Figure 2-11. Line-In Connection
1-Sense (+)
2-GND
3-Relay COM
4-Relay NO
5-Line-In(+)
6-Line-In(-)
7-Line-Out(+)
8-Line-Out(-)
9-Spkr Out(+)
10-Spkr Out (-)
CLASS II WIRING
See
Figure 2-9
See
Figure 2-10
See
Figure 2-11
See
Figure 2-12
See
Figure 2-13
Paging Amplifier
+12V Strobe
When the Paging Amplifier is
called from a remote phone, the
relay on the Paging Amplifier can
be programmed to blink and drive
an Alert Strobe.
High PIV Ultrafast
Switching Diode
Output Contacts
AC or DC-rated
depending upon
controlled device
requirements
DC Power Supply
(Max. 30 VDC @ 1A)
Solid State or
Mechanical Relay
AC or DC
Power
Source
IN
OUT
Paging Amplifier
Paging Amplifier
When line-in is enabled on
the V2 Paging Amplifier,
the audio received from
the line-in connection will
be played to the
speaker(s) and line-out
connection as the lowest
priority audio.
Line Plug
