CyberData 10860, Operation Manual

Page: 17 / 42

Installing the VoIP Loudspeaker Amplifier
VoIP Loudspeaker Amplifier Operations Guide 930112C CyberData Corporation
11
2.2.5 Confirm the IP Address, Test the Audio, and Check the Volume
When the loudspeaker amplifier is operational and linked to the network, use the Reset Test
Function Management
(RTFM) switch ( Figure 2-7 ) on the loudspeaker amplifier face to announce
and confirm the loudspeaker amplifier’s IP Address, test that the audio is working, and check the
volume.
Figure 2-7. RTFM Switch
To announce a loudspeaker amplifier’s current IP address:
1. Press and hold the RTFM switch until it beeps (after one second).
Activity Green The Activity LED blinks to indicate network traffic.
Table 2-6. Loudspeaker Amplifier LEDs (continued)
LED Color Function
RTFM switch