© 2019, CyberData Corporation, ALL RIGHTS RESERVED
931658A
Quick Reference
Quick Reference
931658A
© 2019, CyberData Corporation, ALL RIGHTS RESERVED
Loudspeaker Amplifier Connections
Strobe Cable Connection
Remove Hole Plug
and Grommet
Cover
Plate
Slide I2C Cable Grommet
into Cover Plate Slot
Cover
Screw
Ground Wire
I2C Cable
Network Cable
Power Cable
I2C Cable
with IP66 Rating Enclosure
Power
Injector
Universal
IEC Receptacle
Outlet
to
STROBE IN
Washer that
Came with the
1/2" EMT Compression Connector
Install It onto Rear Conduit Hole
*
1/2" EMT Compression Connector
Remove Cord Grip Assembly
then Replace with
1/2" EMT Compression Connector
1/2" EMT Compression Connector
Lock
Washer
1/2" EMT Conduit
Remove Hole Plug Assembly then
Lock
Washer
*
to
J1
J1
Cable & Wire
Create Service Loop
RGB
STROBE
AUXILIARY
OUTDOOR
Optional Conduit Wall Mounting (Outdoor Intercom or Outdoor Call Button)
Outdoor
Call Button
OR
Network Cable
to J1
I2C
to JX
Outdoor
Intercom
Faceplate &
PCB Assembly
Torx Security Screw
Faceplate Mounting
Wall Anchor & Screw
1/4" Concrete
are Not Provided
Hole Plug
Assembly
Conduit
to
JX
to
J1
to
JX
Backbox
Auxiliary
Outdoor
to Ground Lug
Ground Wire
Through Rear Conduit Hole
Network and Ground Wires in
Spacer
Compression
Connector
Backbox
Torx Key
Torx Security Screw
Faceplate Mounting
Ground Wire
I2C Cable
Network Cable
Spacer
1/2" EMT
1/2" EMT
Compression
Connector
1/2" EMT
on Faceplate
to Ground Lug
RGB
Strobe
on Faceplate
to Ground Lug
Apply RTV
Silicone Sealant
Around Mounting Holes
Apply RTV
Silicone Sealant
Around Backside Perimeter
Note: All parts shown are not provided
other than the 011490 Strobe Kit.