CyberData 011313, Operation Manual, Page: 11 / 42

PoE Digital Clock Configuration Utility
Discovery Dialog
Operations Guide 931080C CyberData Corporation
4
1.5 Discovery Dialog
Clicking the Discovery Scan Button starts the discovery of PoE Digital Clocks on the LAN. During
Discovery, the Network Configure Button and Test Monitor Button are not available. When Discovery
completes, a list of PoE Digital Clocks connected to the LAN appears on the Device Log , and then
the Network Configure Button and Test Monitor Button become active.
Figure 1-3. Discovery Dialog
In Figure 1-3 , there is only one PoE Digital Clock connected to the LAN. If there were more PoE
Digital Clocks on the LAN, they would appear as a list of PoE Digital Clocks. The final PoE Digital
Clock discovered is automatically selected. Network Configuration parameters such as IP Address
and MAC Address are listed as well as PoE Digital Clock manufacture information, serial number,
device name, and firmware version.
If more than one PoE Digital Clock appears on the list, click anywhere the list entry to select which
PoE Digital Clock is to be Configured or Tested.
Then click the Network Configure Button or Test Monitor Button to open the Network Configuration
Dialog or Test Monitor Dialog .
Scan button Test Monitor button Configuration button