Installing the InformaCast Enabled Paging Adapter
Connecting the InformaCast Enabled Paging Adapter
Operations Guide
931767B
CyberData Corporation
10
2.3.6 Connect to the Power Source
To use PoE, plug a Cat 5 Ethernet cable from the InformaCast Enabled Paging Adapter
Ethernet
port to your network. As an alternative to PoE, you can plug one end of a +48V DC power supply into
the SIP Paging Adapter, and plug the other end into a receptacle. If required, connect the earth
grounding wire to the chassis ground on the back of the unit. See
.
Figure 2-4. Connecting to the Power Source
Chassis ground
Chassis Ground
PoE
Non PoE with 48 VDC Power Supply
Non-Poe
•
For Non-PoE, connect the InformaCast Enabled Paging
Adapter to a 48VDC power supply. See the figure on the
left.
•
Note
: Do not use both PoE and external power.
Chassis Ground
•
If required, connect the earth grounding wire to the
Chassis Ground. See the figure on the left.
48VDC
To set up the device, connect the device to your network:
Poe
•
For PoE, plug one end of an 802.3af Ethernet cable into
the InformaCast Enabled Paging Adapter Ethernet port.
Plug the other end of the Ethernet cable into your
network. See the figure on the left.
