Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide
931767B
CyberData Corporation
23
2. On the
Device
page, you may enter values for the parameters indicated in
Note
The question mark icon (
) in the following table shows which web page items will be defined
after the
Toggle Help
button is pressed
.
Table 2-6. Device Configuration Parameters
Web Page Item
Description
Line-in Settings
Enable Line-in to Line-out Loopback
Line-in audio will play back out the device's audio output ports. This is
the lowest priority audio and will be preempted by any other audio
stream.
Clock Settings
Enable NTP
Sync device's local time with the specified NTP Server.
NTP Server
Use this field to set the address (in IPv4 dotted decimal notation or as a
canonical name) for the NTP Server. This field can accept canonical
names of up to 64 characters in length.
Timezone
Enter the tz database string of your timezone.
Examples:
America/Los_Angeles
America/New_York
Europe/London
America/Toronto
https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
for a full list of valid strings.
Current Time
Displays the current time.
InformaCast Settings
InformaCast Address
Use this field to set the address of your InformaCast server. This will
override any InformaCast server addresses received via SLP or DHCP.
If using TFTP for configuration, simply enter an IP address (eg.
10.0.1.195) If using HTTP for configuration, enter the full URL to the
path that contains the configuration file.
Do not input the file name
(e.g.http://10.0.1.195:8081/InformaCast/resources/).If the HTTP
protocol is not specified with
http://
, then TFTP will be used.
Misc Settings
Device Name
Type the device name. Enter up to 25 characters.
Beep on Init
Device will play the user defined “pagetone” audio file when it boots.
Beep on Page
Device will play the user defined “pagetone” audio file before playing a
SIP page.
Disable HTTPS (NOT recommended)
Disables the encrypted connection to the webpage. We do not
recommend disabling HTTPS for security reasons.
Relay Settings
Activate Relay on Local Audio
The relay will be activated (closed) when the device is playing audio.
Use this to activate an external amplifier when the device is playing
audio.
