Implementing the VoIP Zone Controller
Setting up the VoIP Zone Controller
VoIP Zone Controller 4-Port Audio Out Operations Guide 930109C
CyberData Corporation
5
2.3 Setting up the VoIP Zone Controller
Before you set up the VoIP Zone Controller, be sure that you have received all the parts described in
2.3.1 Connect to the Power Source
To use PoE, plug a Cat 5 Ethernet cable from the VoIP Zone Controller
Ethernet
port to your
network. As an alternative to PoE, you can plug one end of a +48V DC power supply into the VoIP
Zone Controller, and plug the other end into a receptacle. If required, connect the earth grounding
wire to the chassis ground on the back of the unit.
Figure 2-2. Connecting to the Power Source
2.3.2 Connect to the Network
Plug one end of a standard Ethernet cable into the VoIP Zone Controller
Ethernet
port. Plug the
other end into your network.
Figure 2-3. Connecting to the Network
Chassis
ground
