!
Maintenance
!
The Blast Chiller / Freezer is fully automatic and, apart from cleaning needs very little
maintenance.
!
Interior and exterior should be cleaned with soap and water and no abrasives should be
used as they will scratch and spoil the stainless steel finish. Interior shelving and racking
can be removed on most models for easy cleaning. Counter drawer sets can be fully
removed and the drawers can be washed in a dish washer if needed.
!
!
Maintenance and Cleaning
!
Before cleaning and maintenance, the cabinet should be in standby mode then unplugged
from the power supply.
!
Door Gaskets should be cleaned with warm soapy water and inspected on a regular basis
and if damaged they should be replaced. Cooking oils and harsh cleaning detergents will
shorten the life of the gaskets and contact should be avoided.
!
!
Condenser Cleaning
!
All the heat removed from the Blast Chiller is discharged into the room via the condenser
which is similar to a car radiator. This must be kept clean so that the air can pass through it
to remove the heat, if it becomes choked with dust the unit will over heat and this can lead
to a burnt out compressor. The condenser should be brushed with a soft brush to remove
any dust deposited on the alloy fins. The frequency of this cleaning is determined by the
amount of dust in the surrounding area but should be cleaned at least 4 times a year.
!
!
Gasket Replacement
!
Damaged gaskets can easily be replaced. Remove the old
!
gasket by gently pulling it out of the gasket retainer and simply
!
push in the new gasket leaving the corners until last.
!
!
!
End of Life Disposable Requirements
Refrigerated cabinets have components that could be harmful to the environment. All end
of life equipment must be disposed of in accordance with national laws and regulations.
!
!
8