manualshive.com logo in svg

Cyber Suite LED Keypad, User Manual

Share
Download
Cyber Suite LED Keypad User Manual Download Page 12

 

 
 

 

CyberSuite™ LED Keypad User Manual 

                     

 

9 

 

MODIFYING USER OPTIONS 

 

The User Option menu contains options for 
arming, disarming and door latching for the 
optional Card Reader interface. If your 
CyberSuite™ system is not equipped with a 
Card Reader interface, changes to these 

options will have no effect. 

 
Modifying User Options 
 

•

 

Enter SETUP LOGIN mode if you have not done so 
already (see page 6 for details) 

 

•

 

Enter the following key press sequence: 

 
                            , 

 , [USER NUMBER]   ,      

 

•

 

You will now be presented with NUMBER LED’s that 
are lit which correspond to the current user options 
that are ENABLED. To toggle an option on or off, 
press the number corresponding to the option 
required from the list on the following pages, and 
once all options are correct press         to confirm 

the selection. 

 
The available options are described below. 

 

•

 

Option 1 – Arm Only Code 

 

5

 

Enabled allows the user code to be used 
only for arming the CyberSuite™ system. 
 

Summary of Contents for LED Keypad

































Reviews:

No comments

Brands by name

Popular brands

Load more brands