background image

4

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions 

carefully during installation and operation of the unit. Read this manual thoroughly before 

attempting to unpack, install, or operate the Battery modules.

CAUTION!  

The UPS unit must be connected to a grounded AC power outlet with fuse or 

circuit breaker protection. The Battery modules grounded are through the UPS.

CAUTION! 

 The battery can power hazardous components inside the unit, even when the AC 

input power is disconnected.

CAUTION! 

 To prevent the risk of fire or electric shock, install in a temperature and humidity 

controlled indoor area, free of conductive contaminants. (Please see specifications for 

acceptable temperature and humidity range).

CAUTION! 

 (No User Serviceable Parts): Risk of electric shock, do not remove cover. No user 

serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION! 

 (Non-Isolated Battery Supply): Risk of electric shock, battery circuit is not isolated 

from AC power source; hazardous voltage may exist between battery terminals and ground. 

Test before touching.

CAUTION! 

 Wiring must be done by qualified personnel.

CAUTION! 

 DO NOT USE WITH OR NEAR AQUARIUMS!  To reduce the risk of fire, do not use 

with or near aquariums.  Condensation from the aquarium can come in contact with metal 

electrical contacts and cause the machine to short out.

CAUTION! 

 Do not dispose of batteries in fire as the battery may explode.

CAUTION! 

 Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.

CAUTION! 

 A battery can present a risk of electric shock and high short circuit current. The 

following precaution should be observed when working on batteries. 
•  Remove watches, rings or other metal objects.
•  Use tools with insulated handles.

CAUTION! 

 Make sure everything is turned off and disconnected completely before 

conducting any maintenance, repairs or shipment.

CAUTION! 

 Connect the Protection Earth (PE) safety conductor before any other cables are 

connected.

DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR 

NEAR A STRONG HEAT SOURCE!
SERVICING OF BATTERIES SHOULD BE PERFORMED OR SUPERVISED BY PERSONNEL 

KNOWLEDGE OF BATTERIES AND THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED 

PERSONNEL AWAY FROM BATTERIES!

Summary of Contents for BPSE24V40ART2U













Reviews: