Answer/end key (1)
Indicator light (2).
Charger connector (3)
Earphone (4)
Earhook(5)
Microphone (6)
Before you can start using the headset, you must charge the battery and pair the
headset with a compatible phone.
Note: Parts of the headset are magnetic, Metallic materials may be attracted to
the headset .Do not place credit cards or other magnetic storage media near the
headset, because information stored on them may be erased .
■
Charger and batteries
The Bluetooth headset BH22 can be charged either by charger or by the USB
port of computer. Please notice that it is intended to use with the charger that is
included in the package.
Charge the battery
This device has a built-in, rechargeable battery.
1. Connect the charger to a wall outlet or connect the headset to the USB port of
computer. The red indicator light is on during charging.
If charging does not
start, disconnect the charger, plug it again, and retry. Charging the battery
fully may take up to 2 hours.
2. When the battery is fully charged, the red indicator light will turn off.
Disconnect the charger from the wall outlet and the headset or disconnect the
headset from USB charging cable.
The fully charged battery has power for up to 4 hours of talking time or up to 60
hours of standby time. However, the talking and standby times may vary when
used with different mobile phones, usage settings, usage styles, and
environments.
When the battery is running out of power, the red indicator light starts to flash
and there will be 5 prompt sound every 20 seconds.
Pair the headset with a compatible phone
1. make sure your headset is turn off
2. push the answer key for 8 second until the blue and red light flashes
alternately
3. Activate the Bluetooth feature on the phone, and set the phone to search for
Bluetooth devices. See the user guide of your phone for instructions.
