Cyber Acoustics CA-3092BT, Owner'S Manual

Page: 7 / 16

6
Headphone output jack
Power on/off
Auxiliary input jack
Volume control
Bluetooth button
Disconnecting and pairing with a new device
1. Press and hold the Bluetooth button (with Bluetooth logo) for approximately 3 seconds or until you hear
an audible melody; blue LED will start blinking rapidly.
2. Go to your new audio source device’s system settings and look for the speaker device name “CA-3092BT”
to “pair” (connect).
3. When new device pairs up successfully, you will hear a short audible beep, the light will stop blinking
and return to a solid “on” state.
4. Now you can play music on your new paired device.
Playing Audio via AUX
1. Power on the device by pressing the power button.
2. Plug in a 3.5mm AUX cable (not included) into AUX jack.
3. Connect another end of the AUX cable with your secondary audio source.
4. Music comes out from the speaker system when you start the playback on the secondary audio source
** AUX input is prioritized (overrides Bluetooth audio source) whenever a 3.5mm cable is plugged in.
Controls and Features
• Power—the on/off control is on the right satellite speaker. Press to turn the speaker on or off.
• Volume Control—this volume is on the right satellite speaker and is indicated by the /-. Rotate
clockwise to turn the volume up, and counter-clockwise to turn the volume down
• Headphone Output Jack—connect your headphones to this jack and they will mute the speaker system
automatically. The master volume can then be used to turn the volume up or down to your headphones.
• Auxiliary Input Connection—the auxiliary input jack allows the connection of a second audio source.
• Bluetooth Button—this button is on the right satellite speaker for your pairing process
C
M
Y
CM
MY
CY
CMY
K
CA-3092BT_manu.pdf 7 13年4月30日 下午5:29