Cyber Acoustics CA-2806BT, Owner'S Manual

Page: 4 / 16

3
Bluetooth Connection
First time connection with new devices
• When the system is switched on it will go into the Bluetooth pairing mode by default.
• Bluetooth LED status light will begin blinking. Search your device’s Bluetooth list for “CA 2.0 BT SPEAKER”
and tap to connect/pair.
solid blue.
Reconnecting with previous devices
• When the system is on, the speaker system will automatically switch to previous playing mode. If it is at
Bluetooth mode, the system will automatically search and attempt connect with the last paired device. If it is at
Aux mode, press the Source button once; the system will automatically search and attempt connect with the
last paired device.
• Make sure this Bluetooth source is nearby the system to automatically reconnect.
AUX IN Connection
Speakers default to Bluetooth mode when initially turned on. Press the Source button once and you will hear a
tone as the system switches to AUX IN mode. The LED status light will change to solid GREEN.
Connect your source device to the AUX IN jacks.
Force pairing and connection with new devices
• When the system is on, the speaker system has connected to any device. Press and hold the source
button for three seconds until blue LED begins blinking. Search your device’s Bluetooth list for
“CA 2.0 BT SPEAKER”and tap to connect/pair.
Speaker Connection
You can connect these speakers to a variety of devices, such as laptop, computer, smartphone, iPod, MP3
player, CD player, DVD player, and other audio devices. Please read the following instructions along with the
diagrams provided to identify which diagram most closely matches your connection source.
LEFT
Bluetooth Connection
AUX IN Connection
Aux cable included
Connect to headphone jack
LIGHT AUX
RIGHT