manualshive.com logo in svg

CYBELEC ModEva Pac, User Manual, Page: 12 / 46

Share
Download
CYBELEC ModEva Pac User Manual Download Page 12

6/40

ModEva Pac User Manual

A

pril

 

2016  

V2.3

Programming of Punches

Programming of Dies

Programming of all 
dies is done from 
this page.
All the dimensions 
relative to the tool 
are introduced here.
A drawing representing the tool is displayed 
on the right of the screen.
See 

Creating a Tool, page 12

.

Programming of all 
punches is done 
from this page.
All the dimensions 
relative to the tool 
are introduced here.
A drawing representing the tool is displayed 
on the right of the screen.
See 

Creating a Tool, page 12

.

Welcome

Machine Initialization DNC/ENC

This page is reserved 
for the technical 
maintenance of the 
numerical control or 
the machine.
It allows clearing the 
ModEva data and to 
modify the physical indexes of the machine.
The level 3 password (see 

Access by 

Password, page 34

) is necessary to 

intervene on this page.

Main data for the 
machine and the 
numerical control.
Gray color fields 
are multiple choice 
fields which can 
be modified (see 

General navigation, page 5

).

Search of Product/Criteria

Transfer

Allows making data 
transfers from one 
memory to another 
(USB, network, 
etc...).

Allows searching for 
different products 
stored in the 
numerical control 
according to certain 
criteria.

Summary of Contents for ModEva Pac















































Reviews:

No comments