25/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
M
akinG
a
cuT
on
The
e
aSy
c
uT
p
aGe
e
aSy
C
ut
P
aGe
The EasyCut page is used for individual cuts, for example when an external worker needs
to interrupt production just to make a single cut.
The program currently being used for production is only temporarily interrupted
(no need to save it) when switching to the EasyCut page, and then resumed
again when returning to the program page (
→
Current program).
(
)
→
EasyCut
See
Basic Page Description, page 14
for more information on the different
controls on the EasyCut page.
s
etting
i
nstructions
:
1. Touch the
’s name (here
Steel
) until the desired one is displayed.
2. Touch the
and choose one of the predefined thicknesses if
available, or simply enter the actual thickness.
3. If the back gauge is not needed, deactivate it by touching the
.
4. If the back gauge is needed, enter the desired value in the
5. Start the hydraulic pump motor (by pressing this button
if available. It turns red
when the motor is running).
6. Press the
button to position the machine according to the data that were just
entered.
7. When the machine is ready to cut, a
button is displayed.
8. Press the foot switch to execute the cut.
