
.
CHAPTER 3: SETUP & INSTALLATION
4
3. Setup and Installation
3.1 Making the Connections
3.1.1
CONNECTIONS AND SETUP IN GENERAL
This section contains figures showing connections with the specific Cyan
Extenders. In general the connection and setup procedure at both transmitter and
receiver ends is as follows:
At the sender end:
1.
Connect the source video to the Cyan Extender Y, Pb, Pr video input ports.
2.
Connect the CAT5/5e/6 cables to the sender.
3.
Connect power supply
At the receiver end :
1.
Connect the display to the Cyan Extender Y, Pb, Pr video output ports.
2.
Connect the CAT5/5e/6 cables to the UTP connection.
3.1.2
CONNECTIONS ON THE CYAN VIDEO EXTENDER:
Figure 3-1 shows the Cyan transmitter connections and Figure 3-2 shows the
receiver connections.
Figure 3-1. Connections on the Cyan YUV Video Extender Transmitter
Figure 3-2. Connections on the Cyan YUV Video Extender Receiver