Vault Building Maintenance Manual
Page 7 of 8
After tension adjustment pin is locked in place for all spring hinges at maximum
tension, test door closing force. If force is more than required, unwind the tension
adjustment pin 90º, one spring hinge at a time until desired force is reached.
Adjusting the door sweep
To adjust the door sweep, loosen all visible screws, adjust it to the desired position
then replace the screws.
Adjusting the door
Spring tension controls the door. If you are having trouble with the door opening
and closing, try adjusting the spring tension using the steps listed on page 3.
HANDICAP ACCESSIBILITY
All CXT restroom facilities are designed with handicap accessible features and meet all
current ADA standards. The toilet riser or water closet may seem a little too high or the
door may close a little slowly. These features were placed into your building to meet ADA
standards. Replacing the riser or water closet with one that is lower will not meet ADA
requirements. Also increasing the door tension or choosing inexpensive replacement
signs could move your building out of compliance with the ADA guidelines. Before you
change any part, please check with CXT to ensure your changes will meet ADA
requirements. If you have any accessibility questions regarding your buildings, please
contact us at 1-800-663-5789.
10
11