YACK Operation Manual
Version MY181210
COMMANDS - GENERAL
R - RESET
All settings are returned to their default values except for the stored messages in the message
buffers. Restored settings include speed, Paddle Swap, TX level inversion, side tone and TX keyer settings.
Speed will be reset to 15WPM in IAMBIC B mode.
V - VERSION
The keyer responds with the current keyer software version.
0 - LOCK/UNLOCK
The 0 command locks or unlocks the main configuration items but not speed and
playback functions.
HARDWARE RESET
You may find you have lost control of your keyer by setting the speed too fast or accidentally issuing a several
commands (See LOCK) which makes it act strange. The keyer may be reset to factory defaults with the
following sequence:
1) Power off the unit.
2) Hold the command button down and then power on the unit
3) Push and release the reset button
4) Release the command button
Memories will still be intact.
YACK SOFTWARE LICENSE
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation, either version 3 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
A full copy of the GNU General Public License can be found at
http://www.gnu.org/licenses/.
The original YACK software and instructions can be found at:
http://sourceforge.net/projects/yack/
Summary of Contents for Mini Yack IIc
Page 2: ......
