Operating instructions VacuStar L400
Safety
11
Hazard notes and occupational safety
For your own safety and that of the machine, the following
information must be observed and complied with:
Improper operation
DANGER!
Danger due to improper operation!
– Only use VacuStar L400 in a perfect technical
condition. Malfunctions that are relevant for
safety have to be promptly eliminated.
– Conversions of the VacuStar L400 are not
permissible and can impair safety.
– Never bridge any safety equipment or put it out
of operation.
– Any work on the VacuStar L400 and/or on
electrical equipment must be carried out by
specialised staff.
– Repair and maintenance work may only be
carried out when the VacuStar L400 is
stationary.
For this, the VacuStar L400 must be secured
against restarting!
– The VacuStar L400 may not be under pressure
or in a state of vacuum while work is being
carried out on it.
Close shut-off valve on the vehicle side and
vent the pipe between VacuStar L400 and shut-
off valve or manually relieve excess pressure at
safety valve. Observe pressure gauge!
– The drive's protective equipment may only be
removed when the VacuStar L400 is stationary
and has to be correctly refitted after completion
of work.
– Only dismantle accidental contact protection
after VacuStar L400 and pipes have cooled
down.
– It is an environmental protection requirement
that any liquids arising during maintenance work
(e.g. oil) must be collected and disposed of in
an environmentally compatible manner.
Summary of Contents for VacuStar L400
Page 33: ......
