P.O. Box 749 Peekskill, NY 10566 TEL: (845)737-7009 Fax: (845)737-0426 Web: www.compuvideosystems.com
Camera Requirements:
The DSP-1200 will work with any line locked or internally locked color or
B&W cameras for input 1 and 2. Either camera can be line locked or internally locked, however the
internally locked camera will give you a better picture. Both cameras must conform with RS-170A
sync timing standards. This means they must also be interlaced with the proper pulse widths and
sync frequencies. It has been found that some of the less expensive cameras while claiming to
conform with RS-170A, actually do not. This can cause instability in either picture. If you are unsure
of the RS-170A sync standard, please contact
Compu-Video Systems at 845-737-7009
.
Installation:
To set up the screen splitter we recommend you use the following check list to make the process
simple.
1. Connect video cables as per figure 3.
2. Connect power adaptor to unit
3. Plug in power adaptor to AC
SETUP/ALIGNMENT
·Install the cameras to cover the areas to be viewed. Take care that the area of camera 2 that you
want to see in the split is in the center of the picture.
·Locate yourself at the screen splitter. With the front panel switch, verify that each camera shows
individually on the screen.
·Decide on the type of split that you will use. Example: Vertical split, Horizontal split, Window.
·Decide where the split will be, and in the case of the window, what size it will be.
12 VDC
POWER
VIDEO OUTPUT
A INPUT
B INPUT
Compu-Video Systems Inc.
Peekskill, NY 10524
Y/C
(Fig. 3)
Color or B&W Camera
Color or B&W Camera
