background image

Do not expose this product to water, rain or moisture.

   Doing this can result in electric shock or fire. 

Never take this product apart or try to modify it.

   Doing so is very dangerous and could result in electric shock.

Do not store this product near open flame.

   Do not use this product near open flame or place lit or flammable items, such as

   candles, incense, ect., on it.

Do not place any containers filled with water or other liquids near this product.

   Doing so could result in fire or electric shock if the liquid spills and enters the product or

   gets  it wet.  If a liquid spills near this product, unplug the product immediately.

Do not remove or insert the power supply with wet hands.

   Doing so could result in electric shock.

Do not use the power supply in any of the following ways.

  

   Doing so could result in fire or electric shock.

   Modifying or heating the power cable

   Damaging the power cable

   Bending or tugging on the power cable unnecessarily

   Knotting or kinking the power cable

   Setting heavy objects on the power cable

When moving this product , first unplug the power supply from the outlet.  Do not 

tug the cable or move this product with the power supply plugged into the outlet.

   Doing so could damage the cable, possibly resulting in fire or electric shock.

To reduce the risk of electric shock, do not remove the cover.

   No parts inside the product can be serviced by the user.  If your product needs service

   contact:

Compu-Video Systems Inc. at (845) 737-7009.

Usage Environment

   Avoid using or storing this product in areas such as those listed below.  Doing so could

  damage the product or cause it to malfunction.

     Areas exposed to heat or flames

     Humid areas and areas where water is used

Handling this product

  Do not drop or apply a strong force to this product or any included or connected parts.

  Do not spill liquids around or inside this product or drop flammable objects around or

  inside it.

Power Supply

  Only use the supplied power supply which is designed specifically for this product.

  Do not allow the plug to come into contact with metal or water.

This Product is not designed for contact medical use

  Do not use this product for medical applications that could result in patient contact.

The information in this manual is believed to be accurate.  It is intended for professional 

end users having the skills to evaluate and use the data properly.  Compu-Video assumes 

no liability in connection with damages incurred while using this product.

P.O. Box 749 Peekskill, NY 10566   Tel: (845) 737-7009   Fax: (845) 737-0426   Web: www.compuvideosystems.com

Summary of Contents for DA-3212





















Reviews: