15
Mode) setting, 3 separate measurements will take place in
succession, after which your result is calculated and
displayed as a single, averaged measurement. There is a 15
second resting time between each measurement. A count-
down indicates the remaining time and a beep will sound
for 5 seconds before the 2nd and 3rd readings begin.
If one of the measurements causes an error message, it will
be repeated one more time. If any additional error occurs, the
measurement will be discontinued and error code displayed.
5.5. Memory – displaying the last 120 measurements
At the end of a measurement, this monitor automatically stores
each result with date and time. This unit stores 120 memories for
each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows "A,"
then shows an average of all measurements stored in the unit.
Please note: Measurements for each user are averaged and stored
separately. Be certain that you are viewing the measurements for
the correct user.
Pressing the "M" button again displays the previous value. To view
a particular stored memory, press and hold the "M" button to scroll
to that stored reading.
Memory full
When the memory has stored 120 results, a new, measured value
is stored by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored
values, hold down the "M" button (the instrument must have been
switched off beforehand) until "CL" appears and then release the
button. If you do not want to clear the values, press the
START/STOP button. To permanently clear the memory, press the
"M" button while "CL" is flashing.
Individual values cannot be cleared.
1
