NEED TO CONTACT US?
Phone 1.800.234.5286 | 1.502.495.5400 | Fax 1.502.495.5458
www.winstonindustries.com • E-mail [email protected] | Mail 2345 Carton Drive | Louisville, KY 40299 USA
HBB HOLD & SERVE DRAWER
5
HOW YOUR CVAP WORKS
ON/OFF SWITCH
Energizes control and evaporator and air heat systems. Program mode
initiated if the “1” key is shortly held and released during toggle on. Fill
with potable water prior to turning on.
WARMUP
Display indicates Heat until set points are reached, then LoAd.
FOOD TEMP
Press Food Temp UP/DOWN keys (
) to increase/decrease
temperature in 2°F (1°C) steps while in program mode.
FOOD TEXTURE
Press Food Texture UP/DOWN keys (
) to increase/decrease the
differential (temperature increase above food temp setting) in 2°F (1°C)
steps while in program mode.
CONVERT
°
F to
°
C or
°
C to
°
F
Short press the F/C key (indicated below) while in program mode. The
default temperature display can be changed with a 4 second press
of the F/C key. Choose between AF for air temp in Ferenheit, AC for
air temp in Celcius, EF for evaporator temp in Farenheit and EC for
evaporator temp in Celcius.
CLEAN DAILY
Stainless steel can corrode if soil is allowed to stand. Clean daily.
Remove loose parts and wash in sink. Rinse well. Do not use Chlorine.
CABINET RESET BUTTON
(
INTERNATIONAL UNITS ONLY)
(Located behind drawer.) Resets the thermostat in the event that
the High Limit Thermostat trips. To reset, allow the drawer unit to cool
to below 250°F (121°C). Press the High Limit Reset button. If the High
Limit Thermostat trips frequently, call a service technician for repair.
TECHNICAL SERVICE AND
TROUBLESHOOTING
If you have questions about your CVap appliance, please contact your
Corporate Office, local distributor, or Winston’s Customer Service Center.
internet: www.winstonindustries.com
e-mail: [email protected]
telephone: +1 502.495.5400 | +1 800.234.5286
(8:00 a.m. - 5:00 p.m. EST, Monday through Friday)
Displays
Temperature or Time
selection.
Sets evaporator temperature
to control food temperature
90-200
°
F (32-93
°
C) while in
program mode.
Toggle
between
Fahrenheit
and Celsius
Changes
values of
selected
timer, Food
Temp, or
Food Texture.