Declaration of EC conformity
Declaration of EC conformity
USER AND MAINTENANCE MANUAL
Model
MC 301
Model
MC 301
version 12/04
1) GENERAL
2) REGULATIONS FOR
OPERATOR SAFETY
The company Cuts Diamant Srl
Via Torricelli, 24
43015 Noceto (Parma) Italy
declares that the joint cutter for wet cutting of concrete
and asphalt
Brand: CUTS DIAMANT
Model: MC 301
Serial number:
Year of construction:
complies with the following directives (including
amendment directives):
Machine Directive 98/37/EC
Electromagnetic Compatibility Directive 89/336/EEC
The following harmonised standards have also been
applied :
* EN 292 - 1
* EN 292 - 2
* EN 294
* EN 500 - 1
* EN 500 - 5
Name: SIMONE
Surname: TOSCANI
Position: QUALITY ASSURANCE MANAGER
Noceto,
Signature
1) GENERAL
1.1) Legislation
1.2) Manufacturer data, spare parts, warrantee and
responsibility
2) REGULATIONS FOR OPERATOR SAFETY
2.1) General safety regulations
2.2) Safety signs
2.3) Correct position of the operator
2.4) Airborne noise and vibrations
3) CHARACTERISTICS OF THE JOINT CUTTER
3.1) Models
3.2) Description of the joint cutter
4) OPERATION
4.1) Blade fixing
4.2) Engine starting
4.3) Joint cutter use
5) STORAGE, LIFTING AND TRANSPORT
5.1) Warnings
5.2) Joint cutter lifting
5.3) Transport
6) MAINTENANCE, STORAGE, DEMOLITION AND
DISPOSAL
6.1) Maintenance
6.2) Storage
6.3) Demolition and disposal
Follow the safety rules and instructions included in this
manual. The manual and EC conformity certificate must
always accompany the machine.
MC 301
DIRECTIVE 98/37/EC
Machine Directive
DIRECTIVE 86/188/EEC
Risks related to exposure to
noise (adopted in Italy with L.D.
277/1191)
L.D. 626/1994
and
amendments thereto
related to health and safety in
the workplace
DPR 547/1955
Regulations for prevention of
accidents and hygiene in the
workplace
UNI - EN 292-1/ Nov. 1992
Safety of machinery,
terminology, basic methodology
2.1) GENERAL SAFETY REGULATIONS
The joint cutter can be used only by people who are
- majors
- physically and mentally fit
- trained and in possession of qualifications recognized by the employer
Users must know the instructions included in this manual and the safety
regulations relating to the workplace. Users are therefore required to read this
manual and use the following personal protection devices:
• The joint cutter must be used exclusively to cut asphalt and concrete in compliance
with the safety regulations
• Before using the machine always make sure that the controls and safety devices
are perfectly efficient
• In case of machine failure stop the engine immediately and inform the site
managers
• It is prohibited to use the machine on uneven surfaces and/or bumpy surfaces
• It is prohibited to use the machine in closed environments or in insufficiently
ventilated environments
All requests for information or spare parts should be addressed to:
• Cuts Diamant srl, Via Torricelli, 24 – 43015 Noceto (PR) Italy,
Phone +39 0521 625320, Fax +39 0521 627152, [email protected],
www.cutsdiamant.com
• Cuts Diamant authorised dealer where you have purchased the machine.
Cuts Diamant warrantee for the machine shall be valid for 12 months from the
date of delivery.
The company shall cover repair and/or replacement of defective parts provided
that the machine was used in accordance with the operation and maintenance
instructions included in this manual.
The warrantee shall not cover normal wear of parts due to the use of the machine.
The warrantee shall be invalidated if:
- extraordinary maintenance has been carried out by unauthorized personnel
- non-original spare parts have been used
- the machine has not been used in accordance with the instructions given in this
manual
- ordinary maintenance has been performed without following the instructions
given in this document. Cuts Diamant shall not be liable for damage to objects
or people due to improper use of the machine or by procedures and alterations
carried out by unauthorized personnel.
1.2) MANUFACTURER DATA, SPARE PARTS,
WARRANTEE AND RESPONSIBILITY
1.1) LEGISLATION
UNI - EN 292-2/Nov. 1992
Safety of machinery,
specifications and technical
principles
UNI - EN 418/Oct. 1992
Emergency stop devices, design
principles
UNI - EN 294/Jul. 1993
Safety distance to prevent
danger zones from being
reached by upper limbs
UNI - EN 349/Jun. 1994
Minimum gaps to avoid crushing
of body parts
EN 954-1/Dec. 1992
Safety of machinery,
general design principles
CUTS DIAMANT S.r.l.
Via Torricelli, 24 - 43015 Noceto, Parma - Italia
Tel. +39 0521 625320 (ra) - Fax +39 0521 627152 - [email protected] - www.cutsdiamant.com