Product management
06
Blade
Blade fixture
Transducer horn
1. Change the blade when the product is
turned off and tighten the setscrew.
2. When changing the blade, press the
button on the handle and also the button
of main body for 2 seconds.
3. The cutter assembly is automatically
detected and the sensor beeps with LED
light on for 1.5 seconds then the product
turns off. When the product turns off tighten
the setscrew until there are 3 to 4 LED
lights on.
4. Once the setscrew is fixed, turn the
power of the main body on and press the
handle switch on to check that the product
works correctly.
* Replacement of blade
and replacement of blade fixture
Blade fixing screw
Hexagon wrench
-
Be careful when using the
blade.
-
The 40,000 vibrations per
second rises the temperature
due to friction and make the
product very hot, including
the blade, blade fixture, and
setscrew. Be careful to not
get burns.
Attention
