![CutiePi CUTIEPI-01 User Manual Download Page 5](http://html1.mh-extra.com/html/cutiepi/cutiepi-01/cutiepi-01_user-manual_2701013005.webp)
Please make sure the display is completely turned off after it was shutting down, otherwise it may drain the
battery.
Do not be alarmed if the back of the CutiePi gets hot:
This is by design. This means that the heat sink is doing its job
If you wish, you may cool down CutiePi by by adjusting the
Power Mode
in the Settings
Just like Raspberry Pi, the CutiePi's OS runs on a micro SD card:
The SD card slot is located in the lower right corner of the device
It is spring loaded, and can be released with a gentle push
Insert the card face down, as shown above
You can
fi
nd more information on
https://cutiepi.io/quickstart
Mind the Heat
In Case of Software Upgrade
CutiePi shell - the User Interface