15
ADJUSTMENTS
WARNING!
MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE POWER
SOURCE BEFORE ANY ADJUSTMENTS ARE MADE.
LEVELING EXTENSION TABLES
The extension tables must be level with the planer table. To check the extension tables and adjust if
necessary:
1.
Lay a straight edge (A) on the planer table (C) with one end of the straight edge over the infeed
table (B). SEE FIG 5.
2.
Check to make sure that the infeed table is level with the planer table.
3.
If an adjustment is necessary, raise table, loosen lock nuts (D) and adjust Hex Head Screws (E)
on each side of the table until the infeed table is level with the planer table. This will adjust the
outer edge of the table.
4.
Recheck for level and repeat adjustment if necessary.
5.
Repeat this process for leveling the outfeed table.
FIG 5
E
D
C
A
B
Summary of Contents for 40800H-CT
Page 25: ...25 PARTS 97...
