Custom Equipment Hy-Brid Lifts HB-830CE Maintenance & Troubleshooting Manual Download Page 26

LIMITED PRODUCT WARRANTY

1.    LIMITED WARRANTIES

Subject to the terms, conditions and limitations set forth herein, Custom Equipment, LLC. (the “Company”) 
warrants to the first end-user (“Buyer”) that: 

a.   Limited Product Warranty 

For a period of 24 months from the date that a new product manufactured by the Company (“Product”) 
is delivered to the Buyer, the Product will (i) conform to the specifications published by the Company for 
such Product as of the date of delivery; and (ii) be free of any defect in material and/or workmanship under 
normal use and maintenance; and

b.   Extended Structural and Chassis Warranty  

For a period of 60 months from the date that the Product is delivered to the Buyer, the chassis and other 
structural components  of such Product will be free from defects in material and/or workmanship under 
normal use and maintenance.

2.    EXCLUSIONS / WHAT IS NOT COVERED 

The following items are NOT covered under this Limited Warranty:

• 

Defects in, and damage or loss relating to, any batteries incorporated by the Company into or made a part 
of the Product. Any such defects, damage or loss shall be exclusively covered by the battery manufacturer’s 
warranty, if any. For more information regarding the battery warranty, the Buyer should contact the battery 
manufacturer using the contact information shown on the battery;

• 

Damage or loss resulting from or caused by carrier handling; 

• 

Damage or loss resulting from or caused by normal wear and tear, weathering, lack of use or use with 
incompatible equipment or software;

• 

Damage resulting from or caused by improper maintenance, improper handling or storage, improper use, 
abuse, neglect, operation beyond rated capacity, or operation after discovery of defective or worn parts; 

• 

Any part, component or assembly altered or modified in any way not approved in writing by the Company; 

• 

Damage to any equipment or parts not manufactured by the Company; and

• 

Acts of God, accidents or any other causes beyond the Company’s reasonable control. 

3.    MAKING A WARRANTY CLAIM

As a prerequisite to making any claim under this Limited Warranty, Buyer must give the Company written notice 
of any suspected defect promptly after discovery. Such notice shall specifically identify the suspected defect, 
the original delivery date and complete Buyer identification and location information. The Company will not 
accept any Product for warranty service without receiving Buyer’s written notice and issuing a return goods 
authorization. If requested by the Company, Buyer shall return the defective Product, or parts, components 
or assemblies thereof, to the Company, F.O.B, Company’s designated location.  All returned Products or parts, 
components or assemblies thereof that are replaced under this Limited Warranty shall become the property 
of the Company. The Company reserves the right to review Buyer’s maintenance and operation records and 
procedures to determine if the alleged defect(s) were due to any of the items listed in Sections 2 of this Limited 
Warranty. The Company shall not be liable for any claim under this Limited Warranty if Buyer fails to satisfy the 
conditions set forth in this Section.

4.    EXCLUSIVE WARRANTY REMEDIES
       
       a.   Exclusive Repair or Replace Remedy

The Company’s sole obligation and Buyer’s exclusive remedy with respect to any defect in the Product 
occurring during the warranty periods set forth in Section 1 of this Limited Warranty shall be for the 
Company, at its option, to repair or replace (or have one of its designated authorized dealers repair 
or replace) the Product or part, component or assembly thereof that contains a defect in materials or 

workmanship. The Company reserves the right, at its discretion, to use new, re-manufactured or refurbished 
replacement parts. Notwithstanding anything in this Limited Warranty to the contrary, the Company shall not 
be obligated to replace the entire Product if a covered defect can be remedied by the repair or replacement 
of a defective part, component or assembly. The Company shall be responsible for the cost of all parts 
and labor charges, up to the Maximum Labor Amount determined in accordance with Section 4(b) of this 
Limited Warranty, necessary to remedy such defect.  

       b.   Labor Charges 

If field repairs or parts replacement are necessary on any Product covered by this Limited Warranty, the 
Company will reimburse its designated authorized dealer for those direct labor costs incurred to perform 
such field repairs or parts replacement up to the maximum amount specified in the Company’s current 
Field Service Rate (hereinafter, the “FSR”) or in any ‘Flat Rate Guides’ or similar agreement established with 
the authorized dealer (such maximum amount shall be referred to in this Limited Warranty as the “Maximum 
Labor Amount”). Current versions of the Company’s FSR and Flat Rate Guides are incorporated by reference 
into this Limited Warranty. For a current copy of the Company’s FSR and Flat Rate Guides, Buyer should 
contact the Company at 1-866-334-0756. Buyer shall be responsible for any costs or fees due to the 
authorized dealer in excess of the Maximum Labor Amount. 

5.    DISCLAIMER OF OTHER EXPRESS AND IMPLIED WARRANTIES

EXCEPT FOR THE LIMITED WARRANTIES SET FORTH IN SECTION 1 ABOVE, THE COMPANY MAKES NO OTHER 
REPRESENTATIONS OR WARRANTIES AND HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED REPRESENTATIONS 
OR WARRANTIES REGARDING THE PRODUCT, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY 
OF MERCHANTABILITY, NON-INFRINGEMENT OF PROPRIETARY OR THIRD-PARTY RIGHTS OR FITNESS FOR A 
PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE 
FACE HEREOF. No employee or representative of the Company or any of its authorized dealers is authorized to 
modify any term, condition or limitation in this Limited Warranty unless such modification is made in writing and 
signed by an officer of the Company.

6.    LIMITATION OF LIABILITY 

NOTWITHSTANDING ANYTHING IN THIS WARRANTY TO THE CONTRARY, IN NO EVENT SHALL THE 
COMPANY OR ANY OF ITS AFFILIATES OR SUBSIDIARIES BE LIABLE TO BUYER FOR ANY INDIRECT, SPECIAL, 
EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS, LOST REVENUE, DOWN 
TIME, LOSS OF BUSINESS OPPORTUNITY OR OTHER ECONOMIC LOSSES), WHETHER IN AN ACTION IN 
CONTRACT OR TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE, EVEN IF THE 
COMPANY HAS BEEN SPECIFICALLY ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.
Version of 2.1.13

SECTION 8 | WARRANTY

SECTION 8 | WARRANTY

BY  CUSTOM  EQUIPMENT  LLC

MAINTENANCE & TROUBLESHOOTING
HB-830CE/HB-1230CE

SUPO-653

REV C

MAINTENANCE & TROUBLESHOOTING
HB-830CE/HB-1230CE

SUPO-653

REV C

BY  CUSTOM  EQUIPMENT  LLC

50

51

Summary of Contents for Hy-Brid Lifts HB-830CE






























Reviews: