Custom Engineering MT002-1, User Manual

Page: 5 / 28

1 INTRODUCTION
1.1 General safety information
• Read and keep the instructions which follow.
• Follow all warnings and instructions indicated.
• Before cleaning the mechanism, disconnect the power supply.
• Clean the mechanism with a damp cloth. Do not use liquid or spray products.
• Do not operate the mechanism near water.
• Do not use the mechanism on unstable surfaces that might cause it to fall and be seriously damaged.
• During the integration of the printer, we strongly warn to keep an adeguate paper loop outlet underneath
the presenter, in order to allow the receipt being properly printed out.
• Only use the mechanism on hard surfaces and in environments that guarantee proper ventilation.
• Make sure the mechanism is placed in such a way as to avoid damage to its wiring.
• Use the type of electrical power supply indicated. If in doubt, contact your retailer.
• Do not introduce foreign objects of any kind into the mechanism as this could cause a short circuit or dam-
age parts that could jeopardize mechanism functioning.
• Do not spill liquids onto the mechanism.
• Do not carry out technical operations on the mechanism, with the exception of the scheduled maintenance
procedures speci
fi cally indicated in the user manual.
1.2 General features
PAPER WIDTH 58 mm +0 / -1
RESOLUTIONS 8 dot/mm (203dpi)
PRINTING SPEED up to 90 mm/sec.
SENSORS Paper end, temperature thermistor 30K
LIFE 50 Km printed paper
AUTOLOADING CAPABILITY
COMPACT LAYOUT
1.3 Print head speci fi cations
PRINTING METHOD Thermal line dot method
EFFECTIVE PRINTING WIDTH 48 mm ±0.2 mm
HEAD CONFIGURATION (DOTS/LINE) 384
DOT PITCH 0,125 mm
PRINTING SPEED Up to 90 mm/sec
PAPER WIDTH (MM) 58 mm ±0.1 mm
PAPER ROLL MAXIMUM DIAMETER 60 mm
PAPER FEED METHOD Friction feed, 1 dot line / 2pulse, bipolar
HEAD TEMPERATURE SENSOR Thermistor
PAPER DETECTION Photo interrupter re fl essive
MAXIMUM NUMBER OF DOTS ACTIVATED AT A TIME 100
DOT RESISTANCE (RAV) 176 Ω ±4%
NUMBER OF STROBES 2
1. INTRODUCTION
User Manual
MT002-1 1-1