Street Magic
RT Scuff Guards
Reinforcement Plate Install Guide
1)
If you should notice your air wing plastic looks worn at the mounting holes, or if you wish to further
reinforce their mounting
(which we suggest)
2)
Use these reinforcement plates on the two upper bolts with “up” arrow pointing towards the top .
3)
Install these plates before you install the two upper screws in steps 12 and 13.
Also replace the stock
rear Torx bolt with the supplied 6 X 1 X 15mm screw provided.
Note: Even after installing these reinforcement plates
DO NOT TRY TO SUPPORT YOUR TOTAL BODY WEIGHT
OR TO STAND ON THESE SCUFF GUARDS!
Doing so could result in personal injury to you,
and or damage to your RT.
