Custom Audio Electronics TG558 Series User Manual Download Page 39

Page: 39 / 60

3. PRINTER FUNCTIONS

TG558

- d

n+1

• Each pair of bytes identify a digit, and must be as follows :

• This command is present only in the printer version with display (TG558-D).

[Default]
[Reference]
[Example]

To visualize the character “+” on all 4 display digits send :
$1D

$45

$34

$80

$34

$80

$34

$80

$34

$80

[Name]

Enabling graphic display effects.

[Format]

ASCII

Hex

Decimal

[Range]

≤

4, 49

≤

[Description]

Enables the graphic display effects. There are a4 effects already stored into the printer
that can be reloaded in base of the n value.

[Notes]

• This command is present only in the printer version with display (TG558-D).

[Default]
[Reference]
[Example]

[Name]

Transmit printer ID

[Format]

ASCII

Hex

Decimal

Summary of Contents for TG558 Series





























































Search results

Summary of Contents for TG558 Series

Reviews:

Related manuals for TG558 Series

Brands by name

Popular brands

Custom Audio Electronics TG558 Series, User Manual

Search results

Summary of Contents for TG558 Series

Reviews:

Related manuals for TG558 Series

Brands by name

Popular brands