Custom Audio Electronics s'print DPT100-B, User Manual

Page: 36 / 56

3. PRINTER FUNCTIONS
3-4 DPT100-B/I/BT
[Description] Carries out the number of line feeds specified in (n)
[Notes] •The number must be ASCII and between 0 and 9 (when n=0 the command is ignored)
• This command clears the line buffer
[Default]
[Reference] $0A
[Example] To forward feed fast, 5 lines at a time:
$35 $0B (or 5 and the command $0B)
D 0 $
[Name] Print the line buffer
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] This command prints the line buffer
[Notes] • If the line buffer is empty, the command is ignored
• If the CRLF option is set, this command is ignored and printing can only be ordered
through the command $0A
[Default]
[Reference] $0F
[Example]
F 0 $
[Name] Set CRLF mode
[Format] ASCII SI
Hex 0F
Decimal 15
[Description] Inhibits the command $0D maintaining enabled only the command $0A for printing
[Notes] • To disable this option, reset the printer
• This command clears the line buffer
• On switching on the default value is in the Option Register
[Default] Setting in the option register by means of the front keys
[Reference] $0D
[Example]
1 1 $
[Name] Graphic mode
[Format] ASCII DC1
Hex 11
Decimal 17
[Description] Enables graphic mode:
a line in 24 column mode corresponds to 144 horizontal dots divided into 24 blocks of 6
dots each; a line in 40 column mode corresponds to 240 horizontal dots divided into 40
blocks of 6 dots each.
[Notes] To obtain graphic printing, enter the command $11 at the beginning of each line. The
format of the byte in graphic configuration is:
X R P6 P5 P4 P3 P2 P1
D7 D6 D5 D4 D3 D2 D1 D0