INTRODUCTION
MT002
1
CONVENTIONS USED IN THE MANUAL
N.B.
Gives important information or suggestions relative to the use of the printer.
WARNING
The information marked with this symbol must be carefully heeded to safeguard against damaging
the printer.
DANGER
The information marked with this symbol must be carefully heeded to safeguard against injury to
the operator.
GENERAL SPECIFICATIONS
Item
Specification
Printing method
Thermal line dot method
Effective printing width
48 mm
±
0,2 mm
Head configuration (dots/line)
384
Dot Pitch
0,125 mm
Printing Speed
up to 90 mm/sec
Paper width (mm)
58 mm + 0 / -1 mm
Paper roll maximum diameter
60 mm
Paper feed method
Friction feed, 1 dot line/2 pulses, bipolar
Head temperature sensor
Thermistor
Paper detection
Photo interrupter reflessive
Maximum number of dots
activated at a time
100
Dot resistance (Rav)
176
Ω
±
4%
Number of strobes
2
5 °C
0,16 mJ/dot (0,68 ms) V
H
= 7.2V
25 °C
0,13 mJ/dot (0,55 ms) V
H
= 7.2V
Header energy
45 °C
0,11 mJ/dot (0,47 ms) V
H
= 7.2V
Driver saturated resistance (Ric)
9
Ω
External dimensions (W x D x H)
67,3 x 17,4 x 33
Weight
36 gr.
Operation Voltage Thermal head
5 V
±
5%
Current consumption
Medium 2,5 A
Max 4 A
Peak 3 A
Life/Reability
50 Km
1 x 10
8
pulses
Recommended paper weight
55 g/m
2
Recommanded paper
OJI KF-50HDA or equivalent
Noise
Max 51dbA
(Tab. 1)
