DIALLING
To make a call, lift the handset, listen for the dial tone and press the appropriate buttons for the number you
require.
STORE a Number in memory
To store a number, lift the handset, press “STORE”, and dial the number that you wish stored. Then press
STORE again and the address where you wish the number stored. Numbers can be stored either in one of the
three one-touch memories (M1, M2 or M3,) or in one of the ten keyboard addresses (keys 0-9)
E.g. To store 555 6789 in address 8
-
Press STORE
-
Dial 5,5,5,6,7,8,9
-
Press STORE
-
Press 8
-
Hang up
If a pause is required in a stored number this can be achieved by pressing the “Redial/Pause” button at the point
that the pause is required. Disconnection of the telephone for more than a brief period or can erase the stored
numbers.
.
MEMORY DIALLING USING TEN KEYPAD ADDRESSES
To dial a stored number, press “AUTO" and the address (keys 0-9)
E.g. To dial the number 555 6789 stored in address 8
- Lift the handset
-
Press “Auto"
- Press 8
MEMORY DIALLING USING ONE TOUCH MEMORIES
To dial the number stored in M1, M2 or M3, lift the handset and Press M1, M2 or M3
REDIAL/ PAUSE
To redial the last number called, pick up the handset (or depress the handset switch briefly). Then press the
“Redial” button. The phone will automatically redial the last number dialled. If the “Redial” button is pressed after
any other buttons have been depressed, it operates as a “Pause” button, which is useful sometimes if you are
connected to a PABX.
SAVE BUTTON
(Temporary Memory)
Press this button at any time during a call, after you have dialed a number, to temporarily store that number. You
can quickly recall this number later by picking up the handset and pressing "Save" again even after dialing other
numbers (unlike redial which always dials the last number called.)
RECALL or FLASH
This button provides a timed "Hookflash" for use with special Telecom services such as “Call Waiting” or with
PABX. It can also be used to release the hold / mute.
HOLD
Hold can be used to transfer a call to another telephone in your building on the same line. Press the hold button
and hang up the handset. The red light will light to show the call is being held. You can now go to another
telephone or come back to the same one and continue the call by picking up the handset. The hold light will clear
once the call is picked up again.
RINGER VOLUME HI / LOW/ OFF
Use this switch to select either a high or low or no ringer volume.
The Neon Ring Indicator will still flash with the Ring switch set to off.
EARPIECE VOLUME LO / HI
This switch allows you to select the earpiece volume that best suits local conditions.
As well as offering increased volume with the earpiece control in the “Hi” position, your FX5100m will also
operate with most hearing aids.
COLOURED RINGER LENS REPLACEMENT - - OPTIONAL FEATURE ON SOME MODELS
If your telephone is supplied with different coloured lenses you can select the colour of your choice.
WARNING before changing the lens you must unplug the telephone from the wall socket. (This may clear
telephone memory depending on time unplugged).
Gently press the lens face and slide it out then slide in a new one. Take care not to press down inside the
telephone or the circuit or neon indicator (bulb) may be damaged. Re connect the telephone plug.
