8 Subscribe / Register / De-Register an additional handset.
8.1 Subscribing another Handset to a Base Unit
You only need to subscribe the handset if:
The handset subscription has been removed from the base unit (e.g. after the "remove
handset" procedure below has been carried out or if the handset has somehow lost its
program), or you want to subscribe a different or additional handset to this base unit.
You can subscribe (register) up to 4 handsets to work with one base unit. When purchased
new, each set is ready to use as supplied and does not require additional programming
The handsets will already be subscribed as :
"Handset 1" for single pack or "Handset "1,"Handset 2", "Handset 3" for the triple pack.
To Subscribe / register do the following.
First fully charge up the new handset.
Keep the "Page" button on the base unit pressed for 10 seconds until the Line / Charge
indicator on the base unit begins to blink rapidly. It will blink rapidly for one minute. During
this minute the base unit is in subscribe mode and you must do the following on the handset;
Press and hold the "Caller ID / Scroll up" button key for 3 seconds, then press and hold the *
key for 3 seconds.
If you have more than one full base then enter a number for this base (1-4). The handset will
start searching for the base and when found it will ask you to enter the pin code (4 digits).
Enter the base pin code (default code is 0000). If the pin is wrong, the handset will continue
to show "searching" if the code is correct the handset will be registered, it will show 'HS'
followed by the handset. number. (1-4)
8.2 Removing a handset
Providing you have more than one handset, you can remove one or more of them from a
base. At Standby mode, press and hold the Caller ID / Scroll Up key for 3 sec, Then press
and hold the Mute / Delete key for 3 sec.
Enter the pin code (0000). If the pin is wrong, the handset will go back to standby.
Enter the handset number (1-4) you want to remove.
The unit will go back to standby If the
removal is successfull. If not, it will ask again to enter the handset number.
You can only remove existing handsets OTHER THAN the one you are using.
10