Cushman 622020-FR, Owner'S Manual

Page: 69 / 74

5 - 25
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
PERIODIC SERVICE SCHEDULE

Check

Clean, Adjust, etc.

Replace
To perform service that is listed in this schedule but not described in this manual, contact a local Service Representative or see
the Repair and Service Manual for this vehicle.
NOTE :
Some maintenance items must be serviced more frequently on vehicles used under severe driving conditions
DAILY
BEFORE USE:

Check service brake general operation

Check park brake operation - does it hold on a hill.

Check warning device function in reverse

Check tire pressure, condition of tires & rims.

Check smooth operation of accelerator.

Check for loose or missing hardware.

Check Battery - state of charge, condition, loose terminals, corrosion, hold down &
hardware

Check overall vehicle condition
WEEKLY
(includes items listed in previous table & the following)
TIRES

Examine for cuts, excessive wear and pressure (See GENERAL SPECIFICA-
TIONS)
WHEELS

Check for bent rims, missing or loose lug nuts
COOLING FAN

Check for build-up of foreign matter inside blower housing and fins, clean if required
ENGINE OIL

Check and add if required - DO NOT OVERFILL
STARTER/GENERATOR BELT

Check for tension, wear, cracks
MONTHLY - 20 HOURS
(includes items listed in previous table & the following)
WIRING

Check all wiring for loose connections and broken/missing insulation
ACCELERATOR

Check for smooth movement - DO NOT LUBRICATE CABLE
SERVICE BRAKE
(MECHANICAL BRAKES)

Conduct brake performance test
PARK BRAKE

Check brake performance and adjust if required
CHOKE CABLE

Check for smooth movement and adjustment - DO NOT LUBRICATE CABLE
CARBURETOR LINKAGE

Check attachment, adjust as required
DIRECTION SELECTOR

Check attachment, adjust as required
ENGINE

Check for unusual noise, vibration, acceleration, oil leaks
COOLING FAN

Check for build-up of foreign matter inside blower housing and fins, clean if required
STEERING ASSEMBLY

Check for abnormal play, tightness of all hardware
TIE ROD/LINKAGES

Check for excessive play, bent components or loose connections
REAR AXLE

Check for leakage, add SAE 30 oil as required
QUARTERLY - 60 HOURS
(includes items listed in previous tables & the following)
FRONT AXLE

Check for damage to axle and loose or missing hardware
FRONT SHOCK ABSORBERS

Check for oil leakage and loose fasteners
FRONT SPRINGS

Check for loose hardware, cracks at attachments
FRONT WHEEL ALIGNMENT

Check for unusual tire wear, align if required
PARK BRAKE

Check for bent/binding linkage rod

Check for damage or wear to latch arm or catch bracket

Lubricate as required, use light oil. DO NOT LUBRICATE CABLES OR BRAKE
LATCH
REAR SHOCK ABSORBERS

Check for oil leakage, loose mounting hardware
ENGINE ELECTRICAL SYSTEM

Check coil/spark plug wires for cracks/loose connections
Periodic Service Schedule