Cushman 1600XD4, Owner'S Manual

Page: 115 / 168

7
-
MaiNteNaNce
7
ApplyING GREAsE (D)
there are four greasing points. two
of them are located on both ends of
the universal joint which connects
the gearbox and rear axle. raise the
cargo bed and then apply grease to
the greasing points. it is recommend-
ed to use Nlgi grade No. 2 grease.
(1) Grease fitting (Rear axle drive shaft)
UUVO707b
the other two are located on the
front wheel knuckle. remove the
front wheels to give grease.
UUVO775A
(1) Grease fitting (Front wheel hubstrut)
(1) Grease Fitting (Front Axle Drive Shaft
Around Gear Box)
it is located on the spline area of
front axle drive shaft around the gear
box. raise up the cargo bet to feed
the grease to this fitting.
U12O776A
UD120-OM-1600XD4-07.indd 9 2014-05-08 오후 3:33:53