background image

Assembly and Installation Instructions 

 

 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Cushcraft MA8040V Dual-Band Vertical Antenna 

80 – 40 Meter Vertical Monopole Antenna 

 
 
 

                                                                                                           

 

 
 
 

 

 

 

 

 

 

 

 

956358

_GF_AA

 

Appendix 1: How to make a Current-Choke Balun using a Toroid Form:

 

 

A current-choke style balun may be used to prevent the antenna’s feedline from interacting with the antenna 
and radial system. Best SWR performance was obtained with a choke similar to the one shown here 
installed at the antenna base. 

  

 

 

 
 

       

 
 

MA8040V Specifications:

 

 

Frequency Coverage:

 

  

3.5-4.0 MHz, 7.0–7.3 MHz

 

Impedance:

 

 

 

50-Ohms

 

SWR:

 

 

 

 

1.1:1 typical at resonance  

 

Bandwidth (2:1 SWR)

  

 

100 kHz on 80/75 meters, 300 kHz on 40 meters

 

Height:

   

 

 

23-27 feet (adjustable for 3.5 – 4.0 MHz coverage)

 

Weight:

   

 

 

9.0 LB (4.1 kg.)

 

Typical Gain:

 

 

 

0 dBi @ 3.5 MHz, 2 dBi @ 7 MHz 

  

Ground Radials:            

 

 

Eight recommended (4 x 65’, 4 x 35’)

 

 
 

Limited Warranty:

 

 

Cushcraft Corporation, 48 Perimeter Road, Manchester, New Hampshire 03103, warrants to the original 
consumer purchaser for one year from date of purchase that each Cushcraft antenna is free of defects in 
material or workmanship. If, in the judgment of Cushcraft, any such antenna is defective, then Cushcraft 
Corporation will, at its option, repair or replace the antennas at its expense within thirty days of the date the 
antenna is returned (at purchaser’s expense) to Cushcraft or one of its authorized representatives. This 
warranty is in lieu of all other expressed warranties, and implied warranty is limited in duration to one year. 
Cushcraft Corporation shall not be liable for any incidental or consequential damages which may result from 
a defect. Some states do not allow limitations on how long an implied warranty lasts or exclusions or 
limitations of incidental or consequential damages, so the above limitation may not apply to you. This 
warranty gives you specific legal rights and you may also have other rights which vary from state to state. 
This warranty does not extend to any products which have been subject to misuse, neglect, accident, or 
improper installation. Any repairs or alterations outside of the Cushcraft factory will nullify this warranty.

 

 
 
 
 

 

48 Perimeter Road

 

Manchester, NH 03103

 

603-627-7877

 

FAX 603-627-1764

 

 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

 

Feedline Choke

RG-58 for low power or

RG-303 for high power

 5977003801

FT240-73

Amidon Associates 

Fair-RIte

2.4" OD Toroid Core

12 - 14 Turns coax on 

Use

or

Summary of Contents for MA8040V







Reviews: