Attach your coax to the feed loop using the remaining 8-32 nuts and lock washers.
Make the distance of the exposed conductors as short as possible. Seal this connection
using a appropriate sealant to prevent water from entering the coax. Wind a choke balun
into the coax using a household cleaner or spray paint can. Put 3 turns around the can and
secure the coax together using cable ties. Attach the balun to the boom with tape and route
the coax along the boom to the mast and go down from there.
Once you have all the elements on in the correct location, check the alignment of the elements on the
boom sections. Place the Boom caps on the ends of the antenna
R1
R2
R3
R4
R5
R6
R7
R8
R9
