Operating Instructions
1. Before using the fan, make sure that it is on a flat and stable surface. Damage may
occur if the fan is placed on an incline or decline.
2. Set all the switches to the “OFF” position, and then insert the plug directly into a
standard AC socket-outlet. Be sure that the plugs fit tightly into the socket-outlet.
3. Rotate the timer knob counter clock-wise to “ON” position and then press the speed
button to start the fan. Select the fan speed level: Low, Med, or High. Top stop the
fan, just press the button “Off”.
4. Set the time by rotating the timer knob clock-wise to select the desired timing level,
and the range is between 0 to 60 minutes.
5. If you want to increase the blast area in your room, press the swing button down, and
the fan will oscillate and the blast your room in large scope. To stop oscillating, just
pull out the swing button. Moving the fan head either up or down will change the
direction of the wind.
6. To completely shut the fan off, turn all the controls to the “OFF” position, and then
remove the plug from the socket-outlet.
Cleaning/Maintenance Instructions
To safely take care of your fan, please remember to follow these instructions below:
1. Always remove the plug from the socket-outlet, and allow the fan to stop
completely before cleaning the fan.
2. Do not allow water to drip on, or entering into the fan housing.
3. Always use a soft cloth, moistened with a mild soap solution.
4. Do not use any of the following agents as a cleaners. Gasoline, Thinners, or
Benzene.
5. In case of malfunction or doubt, do not try to repair the fan yourself, it may result
in a fire hazard or electric shock.
Fan Cleaning
Clean the fan grill, housing and base with a soft damp cloth. Do not attempt to remove the
fan blades. Please use caution around the motor housing area. Do not allow the motor, or
other electrical components to be exposed to water.
Fan Storage
When storing your fan in the off-season, it is important to keep it in a safe dry location. It is
important to protect the fan head from any dust. We strongly recommend using the original
box, when storing the fan away.
Conformity with Directives
