Page
12
of
17
© 2017 Maka Technologies Group. All Rights Reserved.
Getting
Started
Charging Case/Earbud of TWS-X100
TM
Charging (Case and Earbuds)
Use the charger to charge the casing and earbud before using it for the first
time. Charge the casing by connecting via USB charger. Use only Maka-
approved chargers, batteries, and cables. Unapproved chargers or cables can
cause the battery to malfunction, explode or damage the case.
If the case or earbud is not charging properly, take the device and the
charger to a Maka Service Centre.
While charging the case and earbud, red light will be light up on
both led indicator. When its fully charged for both earbud and
case, blue light will be on for 2 minutes and then goes off.
-
Bluetooth Earbuds Charging in Case Charging (without
charging case)
While charging the earbuds in the case, red light will be on
both Led
When earbud is fully charge, red light will go off.
Note: This charging case support charging and discharging at
the same time.
