manualshive.com logo in svg

Curtiss-Wright SSR/CHS/001/B, User Manual, Page: 4 / 34

Share
Download
Curtiss-Wright SSR/CHS/001/B User Manual Download Page 4

ii    

Multi-role recorder front panel features .................................................................................. 13

START/STOP switch...........................................................................................................  13
EVENT button .....................................................................................................................  13
Alphanumeric display..........................................................................................................  13
Status LEDs ........................................................................................................................  14

Navigating display settings  .................................................................................................... 15

Viewing current configuration..............................................................................................  16

Preparing memory media  ...................................................................................................... 18

Formatting memory media using a multi-role recorder .......................................................  18
Formatting a SATA SSD using the SSRFormat utility.........................................................  18
Using media space effectively.............................................................................................  19

Recording data  ...................................................................................................................... 19

Controlling data recording ...................................................................................................  19
Recording data with wraparound ........................................................................................  20
Recording events ................................................................................................................  21
About time sources .............................................................................................................  21
Estimated remaining time....................................................................................................  21

Using SNMP  .......................................................................................................................... 22

Configuring the IP address..................................................................................................  22
Setting wraparound mode ...................................................................................................  22
Monitoring operation ...........................................................................................................  22
External control of the screen brightness............................................................................  22

Transmitting and recording data ............................................................................................ 22
File formats and management ............................................................................................... 24

Formatting files....................................................................................................................  24
Opening and closing of files................................................................................................  24
Efficient space management...............................................................................................  25
Filenames............................................................................................................................  25

Viewing recorded files on a PC .............................................................................................. 26

Processing and extracting iNET-X data from recorded PCAP files.....................................  27

Summary of Contents for SSR/CHS/001/B



































Reviews:

No comments