Curtiss-Wright CNS4 CSfC, User Manual

Page: 30 / 141

User Guide DDOC0108-000-A2
CNS4 CSfC 5 - 1 Quick Start
Revision 1.0
Quick Start
The quick start section provides easy to access commands and examples.
5.1 Connections and Controls
1. Refer to paragraph 6.1 Lab Setup / Connections for connection information.
2. Refer to Controls and Indicators section for information about indicators and controls.
5.2 Communications Setup
Refer to paragraph 6.2.2 Communications for information.
5.3 Login
To access the FSMs, the user must be logged into CNS4 and hardware encryption layer. However,
once the software encryption layer has been activated, the user must be logged into the software
layer as well.
5.3.1 CNS4
NOTE
The administrator can configure the unit using the Command Line Interface (CLI).
Administrator
• Username: admin
• Password: istrator
NOTE
The user can access the drives configured as network storage. The user cannot access the CLI.
User
• Username: user
• Password:
password
5.4 Hardware Layer
Refer to paragraph 6.4.2
Hardware Encryption Layer
for information.
NOTE
The unit is shipped with a default ILE account
•
Username: user
• Password: P assword1
5.5 Software Layer
Refer to paragraph 6.4.3 Software Encryption for information.
5.6 Partition Disks
5.6.1 Erase All Partitions / All Slots
Commands:
sysconfig –e
sysconfig --wipe
5.6.2 Check Drive Status
Command:
sysconfig
Example:
cns> sysconfig
sysconfig]
DiskConfig