ECN 16647 . 8/26/15 @ 12.0 . rev M
ECN 14581 . 11/27/[email protected] . rev L
ECN 14301 . 8/1/[email protected] . revK
ECN 13309 . 7/12/11 @ 9.7 . revJ
ECN 12581.9/7/[email protected]
ECN 12572 . 9/1/[email protected] . revG
ECN 12489 . 7/23/10 @ 9.5 . rev F
ECN 12161 . 2/18/10 @ 12.9 . rev E
ECN 10341 . 3/18/9 @ 15.3 . rev D
ecn 10071 . 11/3/8 @ 15.6 . revC
ECN 9932 . 8/25/8 @ 15.0 . revB
ecn 9812 . 7/18/8 . 13.8 . revA
EDR 5296 . 12/9/7 @ 13.5
Printed in U.S.A. 8/2015 F-3595 Rev M
WILBUR CURTIS CO., INC.
6913 Acco St., Montebello, CA 90640-5403 USA
|
Phone: 800-421-6150
|
Fax: 323-837-2410
Technical Support Phone: 800-995-0417 (M-F 5:30
a
.
m
. - 4:00
p
.
m
. PST)
|
Email: [email protected]
Product Warranty Information
Wilbur Curtis Co., Inc. certifies that its products are free from defects in material and workmanship under normal use. The following
limited warranties and conditions apply:
1 year from the original date of purchase.
RETURN MERCHANDISE AUTHORIZATION: All claims under this warranty must be submitted to the Wilbur Curtis Co., Inc. Techni
-
cal Support Department prior to performing any repair work or return of this equipment to the factory. All returned equipment must
be repackaged properly in the original carton. No units will be accepted if they are damaged in transit due to improper packaging.
NO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION (RMA). RMA NUMBER
MUST BE MARKED ON THE CARTON OR SHIPPING LABEL. All in-warranty service calls must be performed by an authorized
service agent. Call the Wilbur Curtis Co., Inc. Technical Support Department to find an agent near you.
Rough-In Drawings
TXSG15
TXSG01
Ø 9.13”
(23.2 cm)
23.00”
(58.4 cm)
8.88”
(22.6 cm)
14.38”
(36.5 cm)
2.13”
(5.4 cm)
3.38”
(8.6 cm)
8.63”
(21.9 cm)
13.25”
(33.7 cm)
9.00”
(22.9 cm)
Ø 9.13”
(23.2 cm)
20.50”
(52.1 cm)
8.88”
(22.6 cm)
14.38”
(36.5 cm)
3.38”
(8.6 cm)
2.13”
(5.4 cm)
8.63”
(21.9 cm)
9.00”
(22.9 cm)
13.25”
(33.7 cm)
